manualshive.com logo in svg

AT&T SB67118 DECT 6.0, User Manual

Share
Download
AT&T SB67118 DECT 6.0 User Manual Download Page 101

System does not 
answer after the 
correct number 
of rings.

Make sure that the answering system is on (page 72).
If toll saver is selected, the number of rings changes to 
two when there are new messages waiting (page 28).
If the memory is full or if the system is off, the answering 
system answers after 10 rings.
In some cases, the answering system is affected by the 
ringing system used by your telephone service provider.
If you subscribe to voicemail service, change the 
number of rings so that your answering system answers 
before your voicemail answers (page 66). To determine 
how many rings activate your voicemail, contact your 
telephone service provider.
If there is a fax machine connected to the same 
telephone line, try disconnecting the fax machine. If 
that solves the problem, consult your fax machine 
documentation for information on compatibility with 
answering systems.

•
•

•

•

•

•

System does 
not record  
messages.

•  Make sure the answering system is on (page 72).
•  Make sure the memory of the answering system is not 

full. Please refer to the 

Remaining space

 section on 

page 32 in the user’s manual. When the answering 
system memory is full, it does not record new 
messages until some old messages are deleted.

If you subscribe to voicemail service, change the 
number of rings so that your answering system 
answers before your voicemail answers (page 66). To 
determine how many rings activate your voicemail, 
contact your local telephone service provider.
If there is a fax machine connected to the same 
telephone line, try disconnecting the fax machine. If 
that solves the problem, consult your fax machine 
documentation for information on compatibility with 
answering systems.

•

•

Appendix

Troubleshooting

95

Summary of Contents for SB67118 DECT 6.0














































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands