manualshive.com logo in svg

AT&T Partner MLS 6, Installation And Use Manual

Share
Download
AT&T Partner MLS 6 Installation And Use Manual Download Page 21

Connect Modular Telephone Cords

CAUTION: 

Disconnect the AC power cord before continuing.

If you are connecting
phones and other equip-
ment directly to the mod-
ules, go to step 20.

If you are using the
Extension Wiring Kit for
additional wiring, install
that now. Then go to step
20.

18

19

Connect the modular telephone

cords for the phones and other equip-

Route the cords through the hook

below the jacks, Leave 2 feet slack to

ment to the extension jacks. Start with
the jack labeled “10.” Continue in
numerical order.

keep the cords from pulling loose when
removing modules.

Connect the Power Cord

Finish the installation by
connecting telephones
and other equipment.

Make sure the circuit breaker on

each 206 module is pushed in (see step

14). Connect the AC power cord to the

206 module on a system with one
module, or to the module connector on
a system with two modules. Press firmly
until it clicks as it locks into place.

20

21

Plug the other end of the power

cord into a grounded wall outlet. The
outlet must not be controlled by a
switch.

If you are using existing

to the wiring run jack for

wiring, connect each cord

that extension. Then go
to step 20.

CAUTION: 

To prevent overheating of the 206 module, do not obstruct the sides.

Do not leave objects (books, cartons, etc.) lying on top of it or resting on its sides.

WARNING: 

There are no user-serviceable parts inside the 206 modules or the

module connector. Hazardous voltages within. DO NOT OPEN!

2-8  

Installing the Hardware

Summary of Contents for Partner MLS 6































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands