manualshive.com logo in svg

AT&T Partner MLS 6, Installation And Use Manual

Share
Download
AT&T Partner MLS 6 Installation And Use Manual Download Page 18

Add the Second Module
(for 2-module systems only)

■

A system with two modules must be wall-mounted.

Tab

Front View

Side View

Mounting

Tracks

Tab

5

7

Remove the plastic protector from

Slide the second module onto the

Attach the module connector to

the connectorr on the right side of the

first module. Make sure the upper and

the top right side of the two modules.

mounted 206 module. Grasp the tabs on

lower pairs of mounting tracks interlock,

the ends of the protector and lift. If that

Align the connector carefully and then

push firmly until the connector snaps into

6

module has no plastic protector, check
the other module and remove the
protector.

as shown in the side view above.

place.

Lines

Go to step 10.

Extensions

8

9

Fasten the connector to the

modules using the two screws included

with the connector (the third screw is a
spare).

as shown.

Label the line and extension jacks

Installing the Hardware  

2-5

Summary of Contents for Partner MLS 6































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands