manualshive.com logo in svg

AT&T Partner MLS 6, Installation And Use Manual

Share
Download
AT&T Partner MLS 6 Installation And Use Manual Download Page 72

Phone Does Not Ring

Possible Cause

Do This

1. Volume control set

Press the volume control

If...

Phone rings increasingly

Then:

Problem is solved.

too low.

button to increase ringer

louder,

volume.

Phone still does not ring,

Go to Possible Cause 2.

2. Phone’s Line Ring-

Check to see if phone’s

Line Ringing is set for "no

Change setting if neces-

ing may be set for

Line Ringing is set for "no

ring."

sary.

"no ring."

ring." Refer to chapter 3.

Line Ringing is set for

Phone may be faulty. Fol-

"ring,"

low troubleshooting pro-
cedure for "PARTNER
Phone Does Not Work."

Calls are Answered Automatically

Problem: A call rings once, then disappears as if it were answered.

Possible Cause

Do This

If...

Then:

1. An optional dev-

If there are any optional

The optional device was

Go to Possible Cause 2.

ice, such as a fax

devices connected to your

set properly,

machine, answering

system, check to see that

machine, or modem,

they are set to answer

answers when it

correctly. If the device is

should not.

answering before it is sup-
posed to, adjust it to

The optional device was

Reset device. If problem

answer on a later ring. If

set improperly,

remains, go to Possible

the device is not sup-

Cause 2.

posed to answer calls at

all, turn its auto-answer
feature off. Refer to the
device’s user manual.

2. Ringer

Check to see that the

The problem is not solved,

Go to Possible Cause 3.

Equivalence is too

Ringer Equivalence

high for the exten-

Number (REN) does not

sion.

exceed 2 (see p. 1-3.) If it
does, unplug the extra
device(s).

3. PARTNER system

If there are any optional

The problem is not solved,

Call 1 800 628-2888.

set incorrectly.

devices connected to your
system, set their
extension’s Line Ringing to
"no ring." If it is set to
"ring," adjust the device to
answer on a later ring.

7-4  

Troubleshooting

Summary of Contents for Partner MLS 6































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands