manualshive.com logo in svg

AT&T Partner MLS 6, Installation And Use Manual

Share
Download
AT&T Partner MLS 6 Installation And Use Manual Download Page 87

FCC Information

D

Federal Communications Commission (FCC) Warning Statement

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a commercial or
residential installation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instruction manuals, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment on and
off, the user is encouraged to try to correct the interference by one or more of
the following measures:

1.

2.

3.

Where it can be done safely, re-orient the television or radio antenna.

To the extent possible, relocate the television, radio, or other receiver with
respect to the telephone equipment.

Plug the telephone equipment into an AC outlet that is not on the same
circuit as the one used by the radio or television.

FCC Notification and Repair Information

This equipment is registered with the FCC in accordance with Part 68 of its
rules. In compliance with those rules, you are advised of the following:

■

■

Means of Connection:  Connection to the telephone network shall be

through a standard network interface jack USOC RJ11C. These USOC jacks
must be ordered from your Telephone Company.

This equipment may not be used with party lines or coin telephone lines.

Notification to the Telephone Companies:  Before connecting this
equipment, you or your equipment supplier must notify your local telephone
company’s business office of the following:

FCC Information  

D-1

Summary of Contents for Partner MLS 6































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands