manualshive.com logo in svg

AT&T Partner MLS 6, Installation And Use Manual

Share
Download
AT&T Partner MLS 6 Installation And Use Manual Download Page 2

Copyright © 1990 AT&T

AT&T 999-506-139

All Rights Reserved

Issue 2

Printed in U.S.A.

October 1990

Notice

Every effort was made to ensure that the information in this document was complete and accurate at the time of
printing. However, information is subject to change.

Federal Communications Commission (FCC) Information

For important FCC interference, registration, and repair information, see appendix D of this document.

Trademarks

PARTNER is a trademark of AT&T.
MLS-6 and MLS-12 are trademarks of AT&T.
MERLIN is a registered trademark of AT&T.
SYSTIMAX is a trademark of AT&T.

Warranty

AT&T provides a limited warranty to this product. Refer to “AT&T Limited Warranties” in chapter 8.

Ordering Information

The order number for this book is 999-506-139. To order copies of this document, call 1 800 432-6600 in the U.S.
or 1 800 255-1242 in Canada. For more information on how to order this and other PARTNER™ system reference
materials, refer to "Reference Materials" in the section entitled "About This Guide." For information on ordering
replacement parts, accessories, and other compatible equipment, refer to appendix C.

Support Telephone Numbers

AT&T provides a toll-free customer helpline 24 hours a day. In the U.S., call the AT&T Helpline at 1 800 628-2888 if
you need assistance when installing, programming, or using your system. In Canada, call one of the following
Technical Assistance Centers for service or technical assistance:

Eastern Canada and Ottawa:

1 800 363-1882

Ontario:

1 800 387-4268

Central and Western Canada:

1 800 663-9817

Summary of Contents for Partner MLS 6































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands