Combination Extension Problem: PARTNER Phone Lights Show Line Is
Busy
Possible Cause
Do This
If...
Then:
Standard phone is
Hang up standard phone.
PARTNER phone light
Problem is solved.
not hung up.
goes off,
Standard phone is hung
Reset PARTNER phone
up,
according to procedure
given under "PARTNER
Phone Does Not Work."
Other Problems with System
This procedure resets the system. Use it when you have any problems that are not mentioned above. Note: A
system reset will disconnect all calls in progress. However, it will not erase any system settings.
Possible Cause
Do This
If...
Then:
1. System needs a
At extension 10,
The problem is not solved,
Go to Possible Cause 2.
software reset.
1.
Press [
Feature
] [
0
] [
0
]
2.
Press the left
[
Intercom
] button
twice.
3.
Press [
#
] [
7
] [
2
] [
8
]
2. System needs a
Unplug the 206 modules’s
The problem is not solved,
Call 1 800 628-2888.
hardware reset.
power cord. Wait 10
seconds, then plug it back
System Dead Due to Power Failure
PARTNER telephones do not work during a power failure— you must use a standard touch-tone or rotary telephone.
For more information about setting up your system for a power failure, see p. 2-3.
The PARTNER system has an internal power supply that allows it to maintain its system settings for approximately
100 hours (four days) after it stops receiving power. After 100 hours elapse, all of the system's settings return to
the factory settings.
7-8
Troubleshooting
