ATAGO 3275, Instruction Manual

Page: 17 / 74

15
Changing passwords
1.
Touch "PASS (a key
symbol) .
”
2.
Type in the current password
and touch "ENTER.
”
3.
Type in a new password twice
and touch "ENTER."
About the administrator password
※
Change the factory default administrator password as soon as possible. As the default password is
available in the manual, anyone can easily alter the settings.
Matters concerning all users
※
When a wrong password is entered, "WRONG PASSWORD" will be displayed.
※ Each password must be unique to the user. If a password is rejected while following the correct
procedure to set a password, the password may have already been taken by another user.
Matters concerning the administrator
※
The password will remain the same after the user name has been changed.
※ If the user name had been left blank when "ENTER" was touched, the name will be reset to the factory
default name. However, the password will remain the same.
※ Please contact ATAGO if the password has been lost.
Matters concerning registered and guest users
※
If a user name had been left blank when "ENTER" was touched, the user information will reset to none.
※ A password cannot be set without first registering a user name.
※ A registered password will reset to none once the user name is changed.