16
MK20HD PLUS / MK20W
English
DIP SWITCH SETTING
The DIP Switch on the back of the MK20HD Plus and MK20W allow users to set a remote IR ID for the
camera. DIP 4 and 5 are used setting the ID of the unit when setting the IR ID of the camera.
Setting unit ID is particularly useful when multiple MK20HD Plus or MK20Ws are deployed in an area,
and user can switch controls among multiple cameras with a single IR remote that comes included
with the MK20HD Plus and MK20W.
IR Remote ID Setting
As mentioned prior, only the first two levers are used for setting the IR remote ID 1 to 3. If the levers
are down, they represent “off ”; if the levers are up, they represent “on”. The ID setting method follows
a binary value system, please use the reference table below for correctly setting the IR remote ID.
Remote ID #
DIP Switch Setting
Pin 5
Pin 4
1
OFF
OFF
2
OFF
ON
3
ON
OFF
IR Remote ID: 2
DIP 4 & 5:
IR ID
Interface
