15
MK20HD PLUS / MK20W
English
Camera Setup
By default, 5 camera fields will be displayed on screen within the software. This can be expanded by
clicking the triangle to the left of the Camera column.
1.
Like with the Controller, click a number field under “Cameras” to open the Scan menu.
2.
Once your network is scanned, all currently connected and compatible cameras will be displayed. You
can select a camera to be assigned to your selected Camera number. Once a camera is assigned it
will turn red. Repeat with additional cameras.
NOTE:
Within the software, cameras are numbered 1 through 25. This is not the case for the MK20RC
Plus as the cameras are separated into 5 banks of 5 cameras. That being the case, you can use the little
table below to understand how cameras assigned in the software are assigned in the MK20RC Plus.
IP Camera Matrix Setup Software
MK20RC Plus
Cameras 1 - 5
Bank 1
Cameras 6 - 10
Bank 2
Cameras 11 - 15
Bank 3
Cameras 16 - 20
Bank 4
Cameras 21 - 25
Bank 5
All cameras are then assigned as cameras 1 to 5 within their respective banks.
Load and Send
There’s one more step that needs to be done before your Asystems MK20HD Plus or MK20W are ready
to operate with your cameras. After the Controllers and Cameras have been scanned and assigned
accordingly, click the “Send” button to upload your settings to the camera and controllers themselves.
After this is finished, the MK20RC Plus will be able to link to any of the connected MK20HD Plus and
MK20W cameras. The IP Camera Matrix Setup Manager software is not necessary beyond this point,
unless any of the preset assignments need to be changed.
At the bottom of the screen, you will also find “Load All” and “Send All” buttons. These will essentially
upload or download
all
controller data accordingly.
Reset
Clicking the “Reset” button on the right of the software will clear the data.
IMPORTANT:
Press ESC on your keyboard to close the Scan Window.
Use this QR code to immediately jump to the MK20RC
Plus webpage on the Asystems website, or use the URL
below.
The IP Camera Matrix Setup Software can be
found within the Resources tab.
http://www.asystems-sys.com/product/mk20rc-plus/
