Asymtek TC V3, Operation Manual

Page: 26 / 60

22 Operation
6. Make sure the EMO button (Figure 5-1) is not activated. If necessary, reset it by turning it
clockwise until the button pops out.
7. Turn the power on by moving the Main Switch to the ON position.
!
When the Cure Module power is turned on, the programmable logic controller (PLC)
initializes without any operator intervention. When the PLC has initialized, the control
software automatically starts. The Main Menu appears.
8. Press the Reset button at the output of the oven (Figure 5-1).
Figure 5-1 EMO Button / Reset Button
EMO Button
Reset Button