Asymtek TC V3, Operation Manual

Page: 18 / 60

14 Components
Automatic Conveyor Chain Lubrication
An Automatic Conveyor Chain Lubrication option is available to ensure optimal chain lubrication
(Figure 3-8). The lubrication module is located at the front of the cure module.
Figure 3-8 Automatic Chain Lubrication System
The lubrication oil tank and pump are built inside the cure module frame and ensure chain lubrication by a
drip mode. The lubrication cycle (frequency and quantity) is controlled by PLC. When the tank is nearing
empty a standard low level alarm will display.
Dropped Board Detection Cell
The Dropped Board Detection Cell is an optical cell that crosses the cure module from the input to the
output of the conveyor (Figure 3-9). If a dropped board is detected, the heat will automatically stop and an
alarm will sound.
"
NOTE
This option is not available for TC 4800 and TC 6600 Cure Modules.
Figure 3-9 Dropped Board Detection Cell