Asymtek TC V3, Operation Manual

Page: 11 / 60

Components 7
3 Components
Overview
This section provides a close look at standard equipment and optional accessories for your TC V3 Cure
Module. This section covers the following components:
•
Standard Module Components
•
Optional Accessories
Safety First
Before operating or performing maintenance on any of the equipment described in this section, please
review the important information provided in the
Safety section.
Standard Module Components
Conveyor System
The Conveyor System moves items (PCBs, substrates, etc.) through the oven for thermal cycle
processing (Figure 3-1). It is adjustable by a hand crank (see Figure 5-5 in the
Operation section).
Maximum product weight is 2 Km per meter.
CAUTION!
The correct operation of the conveyor is not guaranteed if the product weight is
heavier than 2kg per meter. For heavier weight the "
Heavy Duty Conveyor "
option is available.
The conveyor is composed of:
•
electrical motor
•
speed sensor
•
frequency controller in close loop
•
transmission chain
•
2 main conveyor chains
Figure 3-1 Conveyor System