manualshive.com logo in svg

Asus RS920A-E6/RS8, User Manual, Page: 77 / 162

Share
Download
Asus RS920A-E6/RS8 User Manual Download Page 77

ASUS RS920A-E6/RS8; RS924-E6/RS8

5-9

5.3 

Main menu

When you enter the BIOS Setup program, the Main menu screen appears, giving 

you an overview of the basic system information.

5.3.1 

System Time [xx:xx:xx]

Allows you to set the system time.

5.3.2 

System Date [Day xx/xx/xxxx]

Allows you to set the system date.

Refer to section 

5.2.1 BIOS menu screen

 for information on the menu screen 

items and how to navigate through them.

v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.

BIOS SETUP UTILITY

 

Main    

Advanced    Server    Power    Boot    Tools    Exit   

Configure the Storage 

device(s).

System Time 

 

[13:44:30]

System Date 

 

[Fri 05/07/2010]

 Storage Configuration

 System Information

←→

  Select Screen 

↑↓

   Select Item 

+-   Change Field 

Tab  Select Field 

F1   General Help 

F10  Save and Exit 

ESC  Exit

Summary of Contents for RS920A-E6/RS8



































































































































































Reviews:

No comments