manualshive.com logo in svg

Asus RS920A-E6/RS8, User Manual, Page: 132 / 162

Share
Download
Asus RS920A-E6/RS8 User Manual Download Page 132

7-8

Chapter 7: Driver installation

Red Hat

®

 Enterprise Linux OS 4.8

To install the RAID controller driver when installing Red Hat

®

 Enterprise OS:

1.  Boot the system from the Red Hat

®

 OS installation CD.

2.  At the 

boot:

, type 

linux dd

. 

3.  Press <Enter>.

-  To install or upgrade in graphical mode, press the <ENTER> key.
-  To install or upgrade in text mode, type: linux text <ENTER>.
-  Use the function keys listed below for more information.

[F1-Main] [F2-Options] [F3-General] [F4-Kernel] [F5-Rescue]

boot: linux dd

4.  Select 

Yes

 using the <Tab> key when asked if you have the driver disk, then 

press <Enter>.

Main Menu

Do you have a driver disk?

Yes

No

5.  Press <Enter> to continue.

Insert Driver Disk

Insert your driver disk into /dev/sda 

and press “OK” to continue.

OK

Cancel

6.  Select 

No

 and press <Enter> to continue.

More Driver Disks?

Do you wish to load any more 

driver disks?

Yes

No

Summary of Contents for RS920A-E6/RS8



































































































































































Reviews:

No comments