Asus RS920A-E6/RS8 User Manual Download Page 156

Page: 156 / 162

7-32

Chapter 7: Driver installation

7.5.2

Red Hat

Enterprise Linux OS

You need to manually mount the Mellanox driver on a Red Hat

Enterprise Linux

OS.

For users using SUSE Linux Enterprise Server OS, follow the general

instructions in this section to mount the Mellanox driver on your system.

To mount the Mellanox driver
1. Login to the system as root.
2. Create a folder on the desktop and copy the latest Mellanox driver to the

folder.

You can name the folder as you like.

3. Type the command line and mount the driver to the system.

The driver version and the OS label may vary. Ensure that the command line

matches your driver version and operating system.

Summary of Contents for RS920A-E6/RS8



































































































































































Search results

Summary of Contents for RS920A-E6/RS8

Reviews:

Related manuals for RS920A-E6/RS8

Brands by name

Popular brands

Asus RS920A-E6/RS8, User Manual

Search results

Summary of Contents for RS920A-E6/RS8

Reviews:

Related manuals for RS920A-E6/RS8

Brands by name

Popular brands