Asus RS920A-E6/RS8 User Manual Download Page 149

Page: 149 / 162

ASUS RS920A-E6/RS8, RS924A-E6/RS8

7-25

7.4

Display driver installation

This section provides instructions on how to install the ASPEED display driver.
To install the ASPEED display driver:

1. Restart the computer, then log on with Administrator privileges.
2. Insert the motherboard/system support DVD to the optical drive. The support

DVD automatically displays the Drivers menu if Autorun is enabled in your

computer.

If Autorun is NOT enabled in your computer, browse the contents of the support

DVD to locate the file

AUTORUN.EXE

and double-click the

AUTORUN.EXE

run the support DVD.

3. Click

ASPEED AST2050 Display Driver

Summary of Contents for RS920A-E6/RS8



































































































































































Search results

Summary of Contents for RS920A-E6/RS8

Reviews:

Related manuals for RS920A-E6/RS8

Brands by name

Popular brands

Asus RS920A-E6/RS8, User Manual

Search results

Summary of Contents for RS920A-E6/RS8

Reviews:

Related manuals for RS920A-E6/RS8

Brands by name

Popular brands