Asus RS920A-E6/RS8 User Manual Download Page 19

Page: 19 / 162

ASUS RS920A-E6/RS8; RS924A-E6/RS8

1-7

1.6

Internal features

The barebone server includes the basic components as shown.

The barebone server does not include a floppy disk drive. Connect a USB floppy

disk drive to any of the USB ports on the front or rear panel if you need to use a

floppy disk.

*WARNING

HAZARDOUS MOVING PARTS

KEEP FINGERS AND OTHER BODY PARTS AWAY

1. Redundant Power

supply and power fan

(hidden)

2. ASUS KGPX-Q32

Server Board

3. 8056 System fans
4. SATA/SAS backplane

(hidden)

5. Hot-swap HDD tray 1–

8 (SAS and SATA)

6. Slim-type optical drive

bay

7. Front I/O board

(hidden)

8. PCI-E 1,2 Expansion

Boards (hidden)

9. PIKE Slot

A protection film is pre-attached to the front cover before shipping. Please

remove the protection film before turning on the system for proper heat

dissipation.

Summary of Contents for RS920A-E6/RS8



































































































































































Search results

Summary of Contents for RS920A-E6/RS8

Reviews:

Related manuals for RS920A-E6/RS8

Brands by name

Popular brands

Asus RS920A-E6/RS8, User Manual

Search results

Summary of Contents for RS920A-E6/RS8

Reviews:

Related manuals for RS920A-E6/RS8

Brands by name

Popular brands