Asus RS920A-E6/RS8 User Manual Download Page 141

Page: 141 / 162

ASUS RS920A-E6/RS8, RS924A-E6/RS8

7-17

7.2

Intel

Network Connection Software

This section provides instructions on how to install the Intel

Network Connection

Software on the system.
You need to manually install the Intel

Network Connection Software on a Windows

Server operating system.
To install the Intel

software:

1. Restart the computer, then log on with

Administrator

privileges.

2. Insert the motherboard/system support DVD to the optical drive. The support

DVD automatically displays the

Drivers

menu if Autorun is enabled in your

computer.

If Autorun is NOT enabled in your computer, browse the contents of the support

DVD to locate the file

AUTORUN.EXE

and double-click the

AUTORUN.EXE

run the support DVD.

3. Click the item

Intel Network Connection Software

from the menu.

Summary of Contents for RS920A-E6/RS8



































































































































































Search results

Summary of Contents for RS920A-E6/RS8

Reviews:

Related manuals for RS920A-E6/RS8

Brands by name

Popular brands

Asus RS920A-E6/RS8, User Manual

Search results

Summary of Contents for RS920A-E6/RS8

Reviews:

Related manuals for RS920A-E6/RS8

Brands by name

Popular brands