manualshive.com logo in svg

Asus RS920A-E6/RS8, User Manual, Page: 101 / 162

Share
Download
Asus RS920A-E6/RS8 User Manual Download Page 101

ASUS RS920A-E6/RS8; RS924-E6/RS8

5-33

5.6 

Power menu

The Power menu items allow you to change the settings for the Advanced Power 

Management (APM). Select an item then press <Enter> to display the configuration 

options.

v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.

BIOS SETUP UTILITY

Main 

   

Advanced    Server

 

    

Power

    Boot    Tools    Exit   

ACPI APIC support 

 

[Enabled]

  APM Configuration

  Hardware Monitor

←→

  Select Screen 

↑↓

   Select Item 

+-   Change Option 

F1   General Help 

F10  Save and Exit 

ESC  Exit

Select the ACPI state 

used for System 

Suspend.

5.6.1 

ACPI APIC support [Enabled]

Allows you to enable or disable the Advanced Configuration and Power Interface 

(ACPI) support in the Advanced Programmable Interrupt Controller (APIC). When 

set to Enabled, the ACPI APIC table pointer is included in the RSDT pointer list. 

Configuration options: [Disabled] [Enabled]

Summary of Contents for RS920A-E6/RS8



































































































































































Reviews:

No comments