Asus P5B Deluxe WiFi-AP User Manual Download Page 96

Page: 96 / 164

Chapter 4: BIOS setup

4.5

Power menu

The Power menu items allow you to change the settings for the Advanced

Power Management (APM). Select an item then press <Enter> to display the

configuration options.

4.5.1

Suspend Mode [Auto]

Allows you to select the Advanced Configuration and Power Interface (ACPI) state

to be used for system suspend.

Configuration options: [S1 (POS) Only] [S3 Only] [Auto]

4.5.2

Repost Video on S3 Resume [Disabled]

Determines whether to invoke VGA BIOS POST on S3/STR resume.

Configuration options: [Disabled] [Enabled]

4.5.3

ACPI 2.0 Support [Enabled]

Specifies the Advanced Configuration and Power Interface (ACPI) version

supported. Configuration options: [Disabled] [Enabled]

4.5.4

ACPI APIC Support [Enabled]

Allows you to enable or disable the Advanced Configuration and Power Interface

(ACPI) support in the Advanced Programmable Interrupt Controller (APIC). When

set to Enabled, the ACPI APIC table pointer is included in the RSDT pointer list.

Configuration options: [Disabled] [Enabled]

Select Screen

Select Item

Change Option

F1 General Help

F10 Save and Exit

ESC Exit

BIOS SETUP UTILITY

Main Advanced

Power

Boot Tools Exit

Suspend Mode

[Auto]

Repost Video on S3 Resume

[Disabled]

ACPI 2.0 Support

[Disabled]

ACPI APIC Support

[Enabled]

APM Configuration

Hardware Monitor

Select the ACPI state

used for System Suspend.

Summary of Contents for P5B Deluxe WiFi-AP





































































































































































Search results

Summary of Contents for P5B Deluxe WiFi-AP

Reviews:

Related manuals for P5B Deluxe WiFi-AP

Brands by name

Popular brands

Asus P5B Deluxe WiFi-AP, User Manual

Search results

Summary of Contents for P5B Deluxe WiFi-AP

Reviews:

Related manuals for P5B Deluxe WiFi-AP

Brands by name

Popular brands