Asus P5B Deluxe WiFi-AP User Manual Download Page 94

Page: 94 / 164

Chapter 4: BIOS setup

Onboard PCIE GbE LAN_1 [Enabled]

Configuration options: [Enabled] [Disabled]

LAN Option ROM [Disabled]

Configuration options: [Disabled] [Enabled]

Onboard PCI LAN_2 [Enabled]

Configuration options: [Enabled] [Disabled]

LAN Option ROM [Disabled]

Configuration options: [Disabled] [Enabled]

JMicron SATA/PATA Controller [Enabled]

Configuration options: [Enabled] [Disabled]

JMicron SATA Controller Mode [IDE]

Configuration options: [RAID] [IDE] [AHCI]

Serial Port1 Address [3F8/IRQ4]

Allows you to select the Serial Port1 base address.

Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]

4.4.6 OnBoard Devices Configuration

Select Screen

Select Item

+- Change Option

F1 General Help

F10 Save and Exit

ESC Exit

BIOS SETUP UTILITY

Advanced

Configure Win627EHF Super IO Chipset

HD Audio Controller

[Enabled]

Front Panel Support Type

[HD Audio]

Onboard 1394 Controller

[Enabled]

Onboard PCIE GbE LAN_1

[Enabled]

LAN Option ROM

[Disabled]

Onboard PCI LAN_2

[Enabled]

LAN Option ROM

[Disabled]

JMicron SATA/PATA Controller

[Enabled]

JMicron Controller Mode

[IDE]

Serial Port1 Address

[3F8/IRQ4]

Enable or Disable

High Definition Audio

Controller

HD Audio Controller [Enabled]

Allows you to enable or disable the High Definition Audio Controller.

Configuration options: [Enabled] [Disabled]

Front Panel Support Type [HD Audio]

Allows you to set the front panel audio connector (AAFP) mode to legacy

AC’97 or high-definition audio depending on the audio standard that the front

panel audio module supports. Configuration options: [AC97] [HD Audio]

Onboard 1394 Controller [Enabled]

Allows you to disable or enable the onboard 1394 device support.

Configuration options: [Disabled] [Enabled]

Summary of Contents for P5B Deluxe WiFi-AP





































































































































































Search results

Summary of Contents for P5B Deluxe WiFi-AP

Reviews:

Related manuals for P5B Deluxe WiFi-AP

Brands by name

Popular brands

Asus P5B Deluxe WiFi-AP, User Manual

Search results

Summary of Contents for P5B Deluxe WiFi-AP

Reviews:

Related manuals for P5B Deluxe WiFi-AP

Brands by name

Popular brands