Asus P5B Deluxe WiFi-AP User Manual Download Page 63

Page: 63 / 164

ASUS P5B Deluxe

2.7.3

Installing the optional fan

Install the optional fan only if you are using a passive cooler or a water cooler.

Installing the optional fan with an active CPU cooler will interfere with the airflow

and destabilize the system.

1. Position the fan above the pipe

and heatsink assembly.

2. Fit the grooved edge to the

heatsink.

3. Carefully push down the fan until

it snugly fits the heatsink, then

connect the fan cables.

• Plug the optional fan cables to the CHA_FAN and/or PWR_FAN connector

on the motherboard.

• Make sure the optional fan is installed correctly to prevent damage to the

fan and motherboard components.

4. The above photo shows the fans

installed on the motherboard.

Do not tilt the fan.

Do not install the fan with its rear

side facing you.

Summary of Contents for P5B Deluxe WiFi-AP





































































































































































Search results

Summary of Contents for P5B Deluxe WiFi-AP

Reviews:

Related manuals for P5B Deluxe WiFi-AP

Brands by name

Popular brands

Asus P5B Deluxe WiFi-AP, User Manual

Search results

Summary of Contents for P5B Deluxe WiFi-AP

Reviews:

Related manuals for P5B Deluxe WiFi-AP

Brands by name

Popular brands