Asus P5B Deluxe WiFi-AP User Manual Download Page 84

Page: 84 / 164

-1

Chapter 4: BIOS setup

DMA Mode [Auto]

Selects the DMA mode. Configuration options: [Auto] [SWDMA0] [SWDMA1]

[SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2]

[UDMA3] [UDMA4] [UDMA5]

SMART Monitoring [Auto]

Sets the Smart Monitoring, Analysis, and Reporting Technology. Configuration

options: [Auto] [Disabled] [Enabled]

32Bit Data Transfer [Enabled]

Enables or disables 32-bit data transfer.

Configuration options: [Disabled] [Enabled]

SATA Configuration [Enhanced]

Configuration options: [Disabled] [Compatible] [Enhanced]

Configure SATA As [IDE]

Sets the configuration for the Serial ATA connectors supported by the Southbridge

chip.
The AHCI allows the onboard storage driver to enable advanced Serial ATA

features that increases storage performance on random workloads by allowing the

drive to internally optimize the order of commands.

If you want to create a RAID 0, RAID 1, RAID 5, RAID 10, or the Intel

Matrix

Storage Technology configuration from the Serial ATA hard disk drives, set this item

to [RAID].
If you want to use the Serial ATA hard disk drives as Parallel ATA physical storage

devices, keep the defaul setting [IDE].

IDE Configuration

SATA Configuraton

[Enhanced]

Configure SATA as

[IDE]

Hard Disk Write Protect

[Disabled]

IDE Detect Time Out (Sec)

[35]

4.3.6

IDE Configuration

The items in this menu allow you to set or change the configurations for the IDE

devices installed in the system. Select an item then press <Enter> if you want to

configure the item.

Options

Disabled

Compatiable

Enhanced

Summary of Contents for P5B Deluxe WiFi-AP





































































































































































Search results

Summary of Contents for P5B Deluxe WiFi-AP

Reviews:

Related manuals for P5B Deluxe WiFi-AP

Brands by name

Popular brands

Asus P5B Deluxe WiFi-AP, User Manual

Search results

Summary of Contents for P5B Deluxe WiFi-AP

Reviews:

Related manuals for P5B Deluxe WiFi-AP

Brands by name

Popular brands