Asus P5B Deluxe WiFi-AP User Manual Download Page 60

Page: 60 / 164

Chapter 2: Hardware information

P5B Deluxe

P5B Deluxe Internal audio connector

Right A

udio Channel

Left A

udio Channel

Ground

11. Optical drive audio connector (4-pin CD)

These connectors allow you to receive stereo audio input from sound sources

such as a CD-ROM, TV tuner, or MPEG card.

(black)

P5B Deluxe

P5B Deluxe Digital audio connector

+5V

SPDIFOUT GN

SPDIF_OUT

12. Digital audio connector (4-1 pin SPDIF)

This connector is for an additional Sony/Philips Digital Interface (S/PDIF)

port(s). Connect the S/PDIF Out module cable to this connector, then install

the module to a slot opening at the back of the system chassis.

The S/PDIF module is purchased separately.

Summary of Contents for P5B Deluxe WiFi-AP





































































































































































Search results

Summary of Contents for P5B Deluxe WiFi-AP

Reviews:

Related manuals for P5B Deluxe WiFi-AP

Brands by name

Popular brands

Asus P5B Deluxe WiFi-AP, User Manual

Search results

Summary of Contents for P5B Deluxe WiFi-AP

Reviews:

Related manuals for P5B Deluxe WiFi-AP

Brands by name

Popular brands