Asus P5B Deluxe WiFi-AP User Manual Download Page 55

Page: 55 / 164

ASUS

P5B Deluxe

4. JMicron JMB363

Serial ATA RAID connector (7-pin SATA_RAID)

This connector is for a Serial ATA signal cable. This connector supports

a Serial ATA hard disk drive that you can configure for RAID through the

onboard Serial ATA RAID controller.

The JMicron JMB363 controller item in the BIOS is set to [AHCI] by default,

allowing you to use the connectors to build a RAID set. See section “4.4.6

Onboard Device Configuration” for details.

Before creating a RAID set using Serial ATA hard disks, make sure that you

have connected the Serial ATA signal cables and installed Serial ATA hard disk

drives; otherwise, you cannot enter the JMicron

JMB363 RAID utility and SATA

BIOS setup during POST.

P5B Deluxe

P5B Deluxe SATA_RAID connector

SATA_RAID

Summary of Contents for P5B Deluxe WiFi-AP





































































































































































Search results

Summary of Contents for P5B Deluxe WiFi-AP

Reviews:

Related manuals for P5B Deluxe WiFi-AP

Brands by name

Popular brands

Asus P5B Deluxe WiFi-AP, User Manual

Search results

Summary of Contents for P5B Deluxe WiFi-AP

Reviews:

Related manuals for P5B Deluxe WiFi-AP

Brands by name

Popular brands