Asus P5B Deluxe WiFi-AP User Manual Download Page 90

Page: 90 / 164

-0

Chapter 4: BIOS setup

4.4.3

USB Configuration

The items in this menu allows you to change the USB-related features. Select an

item then press <Enter> to display the configuration options.

The Module Version and USB Devices Enabled items show the auto-detected

values. If no USB device is detected, the item shows None.

Legacy USB Support [Auto]

Allows you to enable or disable support for legacy USB devices. Setting to [Auto]

allows the system to detect the presence of USB devices at startup. If detected,

the USB controller legacy mode is enabled. If no USB device is detected, the

legacy USB support is disabled. Configuration options: [Disabled] [Enabled] [Auto]

Port 64/60 Emulation [Disabled]

Allows you to enable or disable the I/O port 60h/64h emulation support. This item

should be enabled for the complete USB keyboard legacy support for non-USB

aware OSes.

Configuration options: [Disabled] [Enabled]

USB 2.0 Controller Mode [HiSpeed]

Allows you to set the USB 2.0 controller mode to HiSpeed (480 Mbps) or

FullSpeed (12 Mbps). Configuration options: [HiSpeed ] [FullSpeed ]

BIOS EHCI Hand-off [Enabled]

Allows you to enable support for operating systems without an EHCI hand-off

feature. Configuration options: [Disabled] [Enabled]

USB WIFI [Enabled] (WiFi-AP Edition Only)

Allows you to enable or disable the USB WIFI module.

Configuration options: [Disabled] [Enabled]

Select Screen

Select Item

Change Option

F1 General Help

F10 Save and Exit

ESC Exit

BIOS SETUP UTILITY

Advanced

USB Configuration

Module Version - 2.24.0-11.4

USB Devices Enabled:

None

Legacy USB Support

[Auto]

Port 64/60 Emulation

[Disabled]

USB 2.0 Controller Mode

[HiSpeed]

BIOS EHCI Hand-off

[Enabled]

USB WIFI

[Enabled]

Options

Enabled

Disabled

Summary of Contents for P5B Deluxe WiFi-AP





































































































































































Search results

Summary of Contents for P5B Deluxe WiFi-AP

Reviews:

Related manuals for P5B Deluxe WiFi-AP

Brands by name

Popular brands

Asus P5B Deluxe WiFi-AP, User Manual

Search results

Summary of Contents for P5B Deluxe WiFi-AP

Reviews:

Related manuals for P5B Deluxe WiFi-AP

Brands by name

Popular brands