Asus ESC1000 User Manual Download

Page: 121 / 194

ASUS ESC1000 G2

4-39

4.5.6

USB Configuration

The items in this menu allow you to change the USB-related features.

The

USB Devices

item shows the auto-detected values. If no USB device is detected, the

item shows

None

Legacy USB Support [Enabled]

[Disabled]

The USB devices can be used only for the BIOS setup program.

[Enabled]

Enables the support for USB devices on legacy operating systems (OS).

[Auto]

Allows the system to detect the presence of USB devices at startup. If

detected, the USB controller legacy mode is enabled. If no USB device is

detected, the legacy USB support is disabled.

Legacy USB3.0 Support [Enabled]

[Disabled]

Disables the function.

[Enabled]

Enables the support for USB 3.0 devices on legacy operating systems

(OS).

EHCI Hand-off [Disabled]

[Disabled]

Disables the function.

[Enabled]

Enables the support for operating systems without an EHCI hand-off

feature.

Main

Ai Tweaker

Advanced

Monitor

Boot

Tool

Exit

Enables Legacy USB support. AUTO

option disables legacy support if no

USB devices are connected. DISABLE

option will keep USB devices

available only for UEFI applications.

Back

Advanced\

USB Configuration >

UEFI BIOS Utility - Advanced Mode

USB Configuration

USB Devices:

1 Keyboard, 1 Mouse, 4 Hubs

Legacy USB Support

Enabled

Legacy USB3.0 Support

Enabled

EHCI Hand-off

Disabled

S.M.A.R.T. Status Check [Enabled]

S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system. When

read/write of your hard disk errors occur, this feature allows the hard disk to report warning

messages during the POST.

Configuration options: [Disabled] [Enabled]

Summary of Contents for ESC1000



































































































































































































Search results

Summary of Contents for ESC1000

Reviews:

Related manuals for ESC1000

Brands by name

Popular brands

Asus ESC1000, User Manual

Search results

Summary of Contents for ESC1000

Reviews:

Related manuals for ESC1000

Brands by name

Popular brands