Asus ESC1000 User Manual Download

Page: 108 / 194

4-26

Chapter 4: BIOS setup

DRAM-AB Power Phase control [Auto]

[Auto]

Proceeds preset phase tuning profile.

[Optimized]

Allows you to set ASUS optimized phase tuning profile.

[Extreme]

Allows you to set the Full phase mode.

DRAM-CD Current Capability [100%]

Setting a higher value brings a wider total power range and extends the overclocking

frequency range simultaneously.

Configuration options: [100%] [110%] [120%] [130%]

DRAM-CD Voltage Frequency [Auto]

This item allows you to adjust the DRAM switching frequency. Assign a fixed high DRAM

frequency to increase O.C range or a lower DRAM frequency for better system stability.

Configuration options: [Auto] [manual]

DRAM-CD Power Phase control [Auto]

[Auto]

Proceeds preset phase tuning profile.

[Optimized]

Allows you to set ASUS optimized phase tuning profile.

[Extreme]

Allows you to set the Full phase mode.

Summary of Contents for ESC1000



































































































































































































Search results

Summary of Contents for ESC1000

Reviews:

Related manuals for ESC1000

Brands by name

Popular brands

Asus ESC1000, User Manual

Search results

Summary of Contents for ESC1000

Reviews:

Related manuals for ESC1000

Brands by name

Popular brands