Asus ESC1000 User Manual Download

Page: 76 / 194

Chapter 3: Motherboard information

3-28

Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module that supports

either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel

audio I/O module cable to this connector.

•

We recommend that you connect a high-definition front panel audio module to this

connector to avail of the motherboard’s high-definition audio capability.

•

If you want to connect a high-definition front panel audio module to this connector, set

the Front Panel Type item in the BIOS setup to [HD]; if you want to connect an AC'97

front panel audio module to this connector, set the item to [AC97]. By default, this

connector is set to [HD].

10. Serial port connector (10-1 pin COM1)

This connector is for a serial (COM) port. Connect the serial port module cable to this

connector, then install the module to a slot opening at the back of the system chassis.

The COM module is purchased separately.

Summary of Contents for ESC1000



































































































































































































Search results

Summary of Contents for ESC1000

Reviews:

Related manuals for ESC1000

Brands by name

Popular brands

Asus ESC1000, User Manual

Search results

Summary of Contents for ESC1000

Reviews:

Related manuals for ESC1000

Brands by name

Popular brands