Asus ESC1000 User Manual Download

Page: 189 / 194

ASUS ESC1000 G2

7-7

7.2.4

Installing four SLI-ready graphics cards

1. Prepare four SLI-ready graphics cards.

Insert the four graphics card into the PCIEX16 slots. If your motherboard has more

than two PCIEX16 slots, refer to Chapter 2 in this user manual for the locations of the

PCIEX16 slots recommended for multi-graphics card installation.

Ensure that the cards are properly seated on the slots.

Align and firmly insert the 4-Way SLI bridge connector to the goldfingers on each

graphics card. Ensure that the connector is firmly in place.

5. Connect four independent auxiliary power sources from the power supply to the four

graphics cards separately.

Connect a VGA or a DVI cable to the graphics card.

4-Way SLI bridge

Summary of Contents for ESC1000



































































































































































































Search results

Summary of Contents for ESC1000

Reviews:

Related manuals for ESC1000

Brands by name

Popular brands

Asus ESC1000, User Manual

Search results

Summary of Contents for ESC1000

Reviews:

Related manuals for ESC1000

Brands by name

Popular brands