Asus ESC1000 User Manual Download

Page: 149 / 194

ASUS ESC1000 G2

5-5

Use the up/down arrow key to select a drive, and then press <Space> to select. A small

triangle marks the selected drive. Press <Enter> after completing your selection.

Use the up/down arrow key to select the stripe size for the RAID array (for RAID 0, 10

and 5 only),and then press <Enter>. The available stripe size values range from 4KB

to 128KB. The following are typical values:

•

RAID 0: 128KB

•

RAID 10: 64KB

•

RAID 5: 64KB

We recommend a lower stripe size for server systems, and a higher stripe size for

multimedia computer systems used mainly for audio and video editing.

WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.

Are you sure you want to create this volume? (Y/N):

Press <Y> to create the RAID volume and return to the main menu, or <N> to go back

to the

CREATE VOLUME

menu.

When the

Capacity

item is selected, enter the RAID volume capacity that you want

and press <Enter>. The default value indicates the maximum allowed capacity.

When the

Create Volume

item is selected, press <Enter>. The following warning

message appears:

Summary of Contents for ESC1000



































































































































































































Search results

Summary of Contents for ESC1000

Reviews:

Related manuals for ESC1000

Brands by name

Popular brands

Asus ESC1000, User Manual

Search results

Summary of Contents for ESC1000

Reviews:

Related manuals for ESC1000

Brands by name

Popular brands