Asus ESC1000 User Manual Download

Page: 165 / 194

ASUS ESC1000 G2

6-11

CPU Strap

Allows you to manually adjust CPU Strap.
1.

Click

CPU Strap

tab.

Click and drag the adjustment bar to the desired value. The graph on the right will

change the value accordingly.

Click on

Apply

to make the change take effect.

CPU Strap

Adjustment

bar

Applies all the

changes immediately

Undoes all the

changes

Click to restore

all startup

settings

•

Every CPU Strap support is subject to the physical characteristics of individual CPUs.

Auto Tuning

ASUS TurboV EVO provides you with these two auto-tuning modes for the most flexible auto-

tuning options.

•

The overclocking result varies with the CPU model and the system configuration.

•

We recommend that you set up a better thermal environment to prevent overheating

from damaging the motherboard.

• Fast Tuning

: fast CPU overclocking

• Extreme Tuning

: extreme overclocking for CPU and memory

Using Fast Tuning

1. Click

Auto Tuning

tab

Fast

2. Read the warning messages

and click

to start the auto-

overclocking process.

TurboV automatically overclocks

the CPU, saves the BIOS settings,

and restarts the system.

Summary of Contents for ESC1000



































































































































































































Search results

Summary of Contents for ESC1000

Reviews:

Related manuals for ESC1000

Brands by name

Popular brands

Asus ESC1000, User Manual

Search results

Summary of Contents for ESC1000

Reviews:

Related manuals for ESC1000

Brands by name

Popular brands