Asus ESC1000 User Manual Download

Page: 139 / 194

ASUS ESC1000 G2

4-57

•

The screenshots in this section are for reference only. The actual BIOS information

vary by models.

•

Refer to the software manual in the support DVD or visit the ASUS website at

www.asus.com for detailed software configuration.

You can decide whether to change

the BIOS boot logo. Click

Yes

if you

want to change the boot logo or

to continue.

Follow the onscreen instructions to

complete the update process.

Locate the BIOS file from the Open

window, click

Open

, and click

Next

Updating the BIOS through a BIOS file

To update the BIOS through a BIOS file:

From the ASUS Update screen,

select

Update BIOS from file

, and

then click

Next

Summary of Contents for ESC1000



































































































































































































Search results

Summary of Contents for ESC1000

Reviews:

Related manuals for ESC1000

Brands by name

Popular brands

Asus ESC1000, User Manual

Search results

Summary of Contents for ESC1000

Reviews:

Related manuals for ESC1000

Brands by name

Popular brands