Astro Machine AstroJet L1, Operator'S Manual

Page: 49 / 86

SECTION 3
OPERATING PRINTER
43
System Settings
Set up a network connection for the Printer. You can also
configure and set the Printer
Date and Time , set the Debug Log
Level and set the Screensaver Timeout (sleep delay) .
Network Settings – Permits you to view, enter or change settings to connect the Printer to your network.
Network Connection Set -Up:
1. Printer is still connected to computer via
USB cable.
To connect the Printer to a network:
From the Toolbox, select
“View”
drop-down menu,
click
“Service Menus”
, then click
“System Settings”
.
2.
“System Settings”
screen opens. Use Network Settings
to enter correct settings for your network.
NOTE: If manually changing the ip_address , make
sure the
“dhcp” and “autoip” boxes are unchecked
.
( Default is checked .) Enter changes in the appropriate
boxes. Click “Submit” .
3. Connect Ethernet cable to
Network Port on
Rear Panel of Printer.