Astro Machine AstroJet L1, Operator'S Manual

Page: 38 / 86

SECTION 3
OPERATING PRINTER
32
Maintenance Screen
Tapping Menu , then Maintenance opens the
Maintenance screen. These buttons operate
functions for Printer and Printhead maintenance.
Inspect Sled – Moves Service Station out from
under the Printhead Assembly for inspection,
cleaning or service.
Circulate Ink – Purges air from ink lines and
primes system after replacing the Ink Tanks or
the Printhead Cartridge.
Full Clean Printhead – Runs cleaning routine
multiple times for the most thorough flushing
and cleaning of the Printhead.
Normal Clean Printhead – Runs cleaning and
wiping routine twice for a thorough flushing
and cleaning.
Quick Clean Printhead – Circulates ink; wipes and cleans Printhead Cartridge.
Paperpath Screen
Tapping Menu , then Paperpath opens the
Paperpath screen. These buttons are used to move
media through the Printer when loading or
unloading the Printer.
Unload – Rewinds the media back onto the
Unwinder and into the Start position on the
Printer.
Cut – Tap to cut the roll. The Cut button may
change to Cut Position – In this instance,
pressing the button advances the last printed
label past the Cutter, then roll is cut and the
media retracts to the Start position.
Load – Moves the media from the Unwinder
and into the Start position.
Reverse Arrow – Moves media back onto the Unwinder. Pressing once moves media at slow speed, pressing
again moves media at faster speed.
Stop – Stops the media from either advancing or rewinding.
Forward Arrow – Moves media forward through the Printer and onto the Winder. Pressing once moves media
at slow speed, pressing again moves media at faster speed.