Astro Machine AstroJet L1, Operator'S Manual, Page: 23 / 86

SECTION 2
INSTALLING PRINTER
17
First Time Install Printhead Cartridge
Printhead Cartridge is a delicate precision device. Handle with extreme care to avoid damage and issues that could
degrade print quality.
CAUTION

Use electrostatic discharge (ESD) protection when handling.

Hold Printhead Cartridge by handles ONLY.

DO NOT touch ink couplings, nozzle surface or electrical contacts.

DO NOT unpack Printhead Cartridge until Printer is ready for
installation. Once unwrapped, delay in installing Printhead can
compromise print quality due to dehydration.

DO NOT place an unwrapped Printhead on any surface before installing.
Protect Printhead from scratches, dust, fibers, dirt and other
contaminants at all times.
1. Open the Top Cover. The
Printhead Latch [1] is
shipped in the open
position, if it is not:
Use the Touchscreen to tap
Menu , then Service . Press
Release Printhead . The
Printer runs, then the Latch
[1] pops open.
NOTE: Remove Cap
Protectors [2] on Ink
Nozzles. Be sure to open
the Latch fully to retract
the Ink Nozzles.
CAUTION
DO NOT PRY OR MANUALLY LIFT THE
PRINTHEAD LATCH OR THE LATCH
MAY BREAK. ONLY OPEN THE LATCH
USING THE RELEASE PRINTHEAD
BUTTON ON THE TOUCHSCREEN OR IN
THE PRINTER TOOLBOX.