Astralpool Viron Connect 10, Installation And Operating Instructions Manual

Page: 36 / 76

36
Chlorine setting for salt chlorinators and ORP for liquid dosing systems.
18) A final summary screen will show the current settings for the controller. If correct, select Exit,
otherwise select Change and repeat above process.
Section 8. Wireless Configuration / Setup
8.1 If a wireless link system is to be installed, you will need to complete the configuration below with all
components at the same point.
Note: Linking of the 2 transceivers by cable is only required during
the configuration process.
8.2 Connect your wireless transceivers (2 off), your touchscreen controller and the touchscreen power
adaptor together as shown in diagram below.