Astralpool Viron Connect 10, Installation And Operating Instructions Manual

Page: 39 / 76

39
8.9 If you are connecting a handheld (RF) remote to the system also, use the “Connect Handheld
Transceivers” option, following the same procedure as for the fixed transceivers. Once connected,
select “Configure Handheld”
8.10 Your RF remote control has 8 outputs which can be programmed to operate any function of
the Viron Connect controller. Possible programming options are;
1) Favourite settings;
i. You can program any of the 8 channels to activate a Favourite setting. This will allow
you to have channel 1 as “Dad’s Spa” where the water is at 35, spa jets running and
blower on and then have channel 2 as “Mum’s Spa” where the water is at 38, only
gentle water flow and the garden waterfall is trickling in the background.
2) Control of pool/spa equipment;
i. You can assign different channels to each of the 3 speeds of your Viron eVo series
pump
ii. Allocate a specific piece of equipment such as a blower or waterfall to come on.
3) All ON/OFF/AUTO function;
i. Nominate a channel to switch all equipment back to Auto. With one button push all
manual changes you have made will be put back to the pre-­‐programmed automatic
position and the timer settings will take over your system again.