Astralpool Viron Connect 10, Installation And Operating Instructions Manual

Page: 7 / 76

7
2.3 Heating (if applicable)
a. Select Heating from the menu screen
b. The current water temperature and the set temperature will be shown on the screen.
Different water temperatures can be set for your pool and your spa.
c. To adjust the set temperature, first select either pool or spa. Then using the up and down
arrows to the right of the set temperature adjust to desired setting.
d. Use the Heater On / Off button to operate your heater (water flow must be present before
heater will function)
2.4 Solar (if applicable)
a. Select Solar from the menu screen
b. Adjust set temperature to desired setting.
c. Select Solar On / Off / Auto
i. Off – turns solar manually off
ii. On – turns solar manually on
iii. Auto – turns solar to automatic operation. If sufficient heat difference between pool
water and collector temperature solar will operate.
d. Select Summer / Winter
i. Summer – normal operation of solar
ii. Winter – solar pump will operate for 5 minutes per day to flush collector (only if
AUTO is selected)