T E A M G T K I T
Hard anodized, PTFE-coated
shocks.
MIP CVD's.
Associated steel turnbuckles.
Pro-Line racing body.
Associated Transmission.
Also includes: New, stiffer, long
wheelbase chassis.
Precision rubber-sealed ball
bearings.
Tuned pipe and manifold.
F A C T O R Y T E A M K I T
Hard anodized, PTFE-coated shocks.
MIP CVD's.
Factory Team blue titanium
turnbuckles.
Pro-Line racing body.
Associated Transmission.
Also includes: New, stiffer, long
wheelbase chassis.
Precision, rubber-sealed ball bearings.
Graphite front & rear shock towers.
Blue screws, blue manifold, blue tuned
pipe.
R e a d y - T o - R u n G T
Already assembled!
Oil-filled shocks.
Associated dogbone rear axles.
Associated steel turnbuckles.
Painted truck body.
Bushing Transmission.
Also includes: .15 Associated
engine and quality AM radio.
New, stiffer chassis.
Bushings.
Tuned pipe and manifold.
Thank you for purchasing this Team Associated product. This manual
contains steps and instructions you will use to set up your gas truck.
Please read this entire manual before attempting to start your gas
truck. Follow the directions in this manual closely so you don't
encounter any problems on start up. We hope that you will enjoy your
new Team Asssociated gas truck kit.
2
YOU WILL NEED THESE TOOLS
TO ASSEMBLE YOUR KIT
Phillips screwdriver #2.
1/8" flat head screwdriver.
5/16" driver or glow plug wrench.
Needlenose pliers.
Thread locking compound (#242
Blue Loctite© or equivalent)
Super glue (cyanoacrylic glue).
Hobby knife WARNING! This knife
cuts plastic and fingers with equal
ease, so be careful.
Precision ruler.
WARNING! Always
use hand and eye
protection with cyano-
acrylic glue!
for the RTR #7090:
Glow plug starter.
Model car fuel.
Fuel bottle.
12 AA size batteries.
Small tie wraps for the air filter.
YOU WILL NEED THESE TOOLS
Small Phillips screwdriver.
Small flat head screwdriver.
5/16" driver or glow plug wrench.
R E Q U I R E D E Q U I P M E N T T O R U N Y O U R K I T
WARNING!
Do not use a power
screwdriver to install screws
into nylon, plastic, or
composite materials. The
fast rotation speed can heat
up the screws being
installed. They can then
break the molded parts or
strip the threads during
installation.
for the pull start version of
Factory Team kit #7061
Team Kit #7067
Team Built #7050:
Glow plug starter.
Model car fuel.
Fuel bottle.
Receiver battery pack.
Glow plugs (AE #MC-59).
R/C two channel surface
frequency radio system
with two servos.
.12 c.i. glow fuel R/C engine.
for the non pull start version of
Factory Team kit #7060
Team Kit #7068
Team Built #7051
:
Glow plug starter.
Model car fuel.
Fuel bottle.
Receiver battery pack.
Glow plugs (AE #MC-59).
Starter box or electric hand starter
with car starter donut
12 volt battery for starter system.
R/C two channel surface
frequency radio system
with two servos.
.12 c.i. glow fuel R/C engine.
TOOLS SUPPLIED
Allen wrenches, .050",
1/16", 3/32", 5/64".
Molded tools (#6956):
TOOLS SUPPLIED
Allen wrenches, .050",
1/16", 3/32", 5/64".
Molded tools (#6956):
T E A M B U I L T G T
Already assembled!
Oil-filled shocks.
Associated dogbone rear axles.
Associated steel turnbuckles.
Painted truck body.
Associated Transmission.
Also includes:
New, stiffer chassis.
Bearings/bushings.
Tuned pipe and manifold.
