20
Installation Instructions
SE LP10 9600 Series Exit Device
With MELR
Copyright © 2020, ASSA ABLOY Access and Egress Hardware Group, Inc. All
rights reserved. Reproduction in whole or in part without the express written
permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
7) Installation Instructions (Continued)
Fig. 10a
a. Feed reader harness through mounting plate (Fig. 10a, b).
b. For Rim, CVR and Mortise:
Begin to secure mounting plate to inside door surface by fastening (2) Phillips flat head machine
screws to lower right and left holes on mounting plate (Fig. 10a).
c. For SVR:
Secure mounting plate to inside door surface by fastening (2) Phillips flat head machine screws to
holes on mounting plate (Fig. 10b)
10. Install Mounting Plate:
Mounting
Plate
Reader
Harness
(2) Self-drilling
screws
Configuration for Rim/CVR/Mortise
Fig. 10b
Configuration for SVR
