4
Installation Instructions
SE LP10 9600 Series Exit Device
With MELR
Copyright © 2020, ASSA ABLOY Access and Egress Hardware Group, Inc. All
rights reserved. Reproduction in whole or in part without the express written
permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
The Corbin Russwin SE LP10 Series exit device is designed to interface with existing Wired Electronic
Access Control (EAC) panels. The reader requires 12VDC for power and features HID
®
multiCLASS SE
®
technology. The technology is designed around Corbin Russwin’s Grade 1 hardware. The exit device
comes with touch bar monitoring (REX) and is provided with an external Door Position Switch (DPS).
Featuring EcoFlex™ technology, the lock operates from 12-24VDC.
•
Door Thickness – 1-3/4” Standard; Can be furnished for
other door thicknesses upon request. Consult factory.
• Outside lever controlled by reader or key allows lever to
retract latch
• Inside push bar produces REX (request to exit) signal and
retracts latch
• Fail Safe or Fail Secure Operation (must specify)
• UL fire listed available
• Wires directly to EAC panels
• Wire from EAC Panel to door must be shielded with a
drain. Drain terminated at EAC Panel controller.
• Supports multiple credential formats:
3) General Description
4) Specifications / Features
The reader requires 12VDC for power,
while the lock accepts 24VDC.
DPS (Door
Position Switch)
McKinney
Electronic
Transfer
Hinge
Wiegand Access
Control System
ED5000N Exit Device
9600 Series Trim
•
125 kHz credential compatibilty
:
• HID Prox
®
, AWID, EM4102
•
13.56 MHz credential compatibility:
• Secure Identity Object
™
(SIO) on iCLASS Seos, iCLASS SE/SR,
MIFARE DESFire EV1/EV2 and MIFARE Classic (on by default)
• Standard iCLASS Access Control Application, ISO14443A (MIFARE)
CSN, ISO14443B CSN, and ISO15693 CSN
• ISO14443A/B (PIV-compatible Transparent FASC-N read) available with
SE LP10-F
(
**
not available with Alternate Indicator Configuration
**
)
• NFC-enabled mobile phones
• 2.4 GHz credential compatibility
• Secure Identity Object
™
(SIO) on Mobile IDs (Bluetooth Smart)
For Mobile Credential-Enabled versions of this electronic lock
(Indicated by “BIPS” in the product order string):
• Mobile Credentials are transmitted to the lock via Bluetooth Smart or NFC ISO/IEC14443 and
must use a mobile device enabled with these technologies.
• Credential and mobile device versions are specified by the credential provider.
• User must acquire the latest HID “Mobile Access” application available from Apple iStore or
Android PlayStore.
Electrical Specifications
• Reader Draw = 150mA @12 / 24VDC
• Actuator Draw = 400mA inrush / 15mA continuous @12 / 24VDC
• Total System Draw = 550mA @12/24VDC
