21
Installation Instructions
SE LP10 9600 Series Exit Device
With MELR
Copyright © 2020, ASSA ABLOY Access and Egress Hardware Group, Inc. All
rights reserved. Reproduction in whole or in part without the express written
permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
a. Connect 6-pin connector from exit device to
6-pin connector on reader harness (Fig. 11a, b).
b. Connect 2-pin connector from exit device to
2-pin connector on reader harness (Fig. 11a, b).
11. Connector Attachments:
Fig. 11b
Fig. 11c
Fig. 11a
c. Connect ElectroLynx
®
4- and 8-pin connectors from the door harness to (black) 4- and
8-pin connectors of the reader harness (Fig. 11c).
Carefully tuck connected harnesses into one-inch hole in door.
NOTE: Neatly fold the wires into the remaining space to prevent pinching wires when
mounting inside escutcheon.
Do not offset connectors and be sure they are completely seated.
Reader
Harness
8-pin
ElectroLynx
4-pin
ElectroLynx
For the following refer to page 17 for ElectroLynx door harness and lock interface:
7) Installation Instructions (Continued)
