background image

15

(617417440)

 FM226A 10/18

Access 800

™ 

TCAC2 Series

Locks

Keypad Programming Instructions

Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company.  

All rights reserved. Reproduction in whole or in part without the express written 

permission of Corbin Russwin, Inc. is prohibited.

For installation assistance contact Corbin Russwin 

1-800-543-3658 • [email protected]

6

Chain Programming

When programming multiple Users and Codes into the M800, M801, M803, M804 and M806 Lock, it is 

not necessary to leave and re-enter the programming Mode (50) for each entry. Multiple entries may be 

chained together and the three different types of user codes (Standard, Passage and One Time) may be 

mixed.
The format to be used is as follows where:

“T” is the Type of user code with “1” = Standard, “0” = Passage and “5” = One Time. 

“UL_” is User Location (04-100 for M800 and 03-2000 for all others) 

“UC_” is User Code (2 to 6 digits) which correlates with the User Location

99# Master or Supervisor Code* 50# Type# User Location a# User Code a* User Code a*

Type# User Location b# User Code b* User Code b* T# ULc# UCc* UCc* T# ULd# 

UCd* UCd* ........ T# UL_# UC_* UC_** 

Example with four User Codes:

Using Master Code 4732 and above information, the lock would be programmed as follows:

99# 4732* 50# 1# 05# 875* 875* 3# 12# 2226* 2226* 2# 08# 5444* 5444* 1# 48# 3367* 3367*

If all user codes are the type 1, it is not necessary to enter the type number with each entry. 

The format now simplifies to:

99# Master or Supervisor Code* 50# User Location a# User Code a* User Code a* ULb# 

UCb* UCb* ULc# UCc* UCc* ........ UL_# UC_* UC_**

 

Example with three User Codes:

Using Master Code 45988 and above information, the lock would be programmed as follows:

99# 45988* 07# 77* 77* 15# 67832* 67832* 91# 7568* 7568**

To chain the User Location delete procedure:

99# Master Code* User Location a#** ULb#** ULc#**....... UL_#****

Using the information from the above example:

99# 45988* 07#** 15#** 91#****

Type

User Location

User Code

1

05

875

3

12

2226

2

08

5444

1

48

3367

Type

User Location

User Code

1

07

77

1

15

67832

1

91

7568

Summary of Contents for Corbin Russwin Access 800 TCAC2 Series

















Reviews: