StarTech.com LTANCHOR, Quick Start Manual

Page: 1 / 2

Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: April 15, 2019 10:31 AM
Product Diagram (LTANCHOR)
Note:
Security Cable and Lock sold separately.
Component Function
1 Security Plate
• Used to hide the Mounting Screws .
• Used to prevent access to the Mounting
Screws .
2 Desk Anchor
• Used in place of a stationary object to secure a
connected
Device
.
Requirements
For the latest requirements, please visit www.startech.com/LTANCHOR .
Installation
Notes:
The
Desk Anchor
is not recommend for use in high humidity conditions, on
glass, ceramic tile, or water absorbent materials.
The following surface types must have a primer applied before the
Desk Anchor can
be properly installed: copper, brass, or plasticized vinyl.
For maximum security, it is recommended that both
Adhesive Backing
and
Mounting Screws
are used when installing the
Desk Anchor
.
Desk Anchor for Cable Lock
1
1. Position the Desk Anchor on the surface you wish to mount it to.
Desk Anchor
Note:
Use a pencil to draw an outline around the Desk Anchor. This will ensure that
you know the area you need to score using the Abrasive Pad .
2. Use the Abrasive Pad (included) to score the surface area you intend to mount the
Desk Anchor
on. Be careful to only score the surface that the
Desk Anchor
will
cover.
3. Use the Alcohol Pad (included) to clean the scored surface prior to installation.
Allow the alcohol to dry before installing the
Desk Anchor
on the surface.
Note:
(Optional) Use the Screw Holes on the Desk Anchor as a guide to drill pilot
holes.
4. Remove the Adhesive Backing on the back of the Desk Anchor, exposing the
adhesive surface. Secure the
Desk Anchor
to the scored area. Apply the adhesive
backing to the surface at room temperature 60 Fahrenheit (16 Celsius).
5. Before connecting a Security Cable to the Desk Anchor, allow the adhesive
backing at least 24 hours to bond to the surface.
6. Insert the
Mounting Screws
(x2) into the
Mounting Holes
on the
Desk Anchor
.
Installing the Mounting Screws
2