12
(617417440)
FM226A 10/18
Access 800
™
TCAC2 Series
Keypad Programming Instructions
Locks
Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Corbin Russwin, Inc. is prohibited.
For installation assistance contact Corbin Russwin
1-800-543-3658 • [email protected]
5
M801, M803, M804, M806 Programming
Enter a Card, Tag, Fob and RF FOB User
99# Master Code* or Supervisor Code*
Yellow LED blinks
50# (See Table Below)# (User Location 03-2000)#
Yellow LED blinks
*
Yellow LED blinks quickly
*
Yellow LED blinks slowly
Present Card, Tag, FOB or RF FOB
BEEP / Yellow LED blinks
*
Yellow LED blinks slowly
*
Yellow LED goes out
Enter a User Code and Card, Tag, FOB and RF FOB
99# Master Code* or Supervisor Code*
Yellow LED blinks
50# (See Table Below)# (User Location 03-2000)#
Yellow LED blinks
User Code (1-6 digits)*
Yellow LED blinks quickly
User Code (1-6 digits)*
Yellow LED blinks slowly
Present Card, Tag, FOB or RF FOB
BEEP / Yellow LED blinks
*
Yellow LED blinks slowly
*
Yellow LED goes out
User Type Table:
Note 1: There is a time delay period between initially depressing the RF FOB
button and the actuation of the lock. In some cases the RF FOB will have to be
depressed (and held for 3 seconds) multiple times to successfully actuate the
lock.
Note 2: In the event that there are co-located RF Technology locks using
individual RF FOBs that are depressed simultaneously; the locks may not
actuate due to cross interference between the locks and the RF FOBs. The
“User” should repeatedly depress (and hold for 3 seconds) the RF FOB button
until actuation of the lock occurs.
0
Passage User
1
Standard User
3
Lockout User
4
Extended Unlock User
5
One Time User
7
Emergency User
8
Communications Enable User
9
Panic User
