5
(617417440)
FM226A 10/18
Access 800
™
TCAC2 Series
Locks
Keypad Programming Instructions
Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Corbin Russwin, Inc. is prohibited.
For installation assistance contact Corbin Russwin
1-800-543-3658 • [email protected]
4
M800 Programming
Enter A One Time User Code
99# Master Code or Supervisor Code*
Yellow LED blinks
50# 5# (User Location 04-100)#
Yellow LED blinks
User Code (1-6 digits)*
Yellow LED blinks Quickly
User Code (1-6 digits)*
Yellow LED blinks slowly
*
Yellow LED goes out
Enter a Lock Out User Code
99# Master Code or Supervisor Code*
Yellow LED blinks
50# 3# (User Location 04-100)#
Yellow LED blinks
User Code*
Yellow LED blinks quickly
User Code*
Yellow LED blinks slowly
*
Yellow LED goes out
Note: The “lock out” user is location dependent and will lock out all users beyond this
location. To ensure that all users are locked out of the keypad, program this user at
User Location “04”.
To Enable/Disable A User
99# Master Code or Supervisor Code*
Yellow LED blinks
56# 0# (Enable) (User Location 04-100)#
or 1# (Disable) (User Location 04-100)# Yellow LED blinks
*
Yellow LED blinks quickly
*
Yellow LED blinks slowly
*
Yellow LED goes out
To Delete A User
99# Master Code
Yellow LED blinks
50# 0# (User Location 04-100)#
Yellow LED blinks
*
Yellow LED blinks quickly
*
Yellow LED blinks slowly
*
Yellow LED goes out
To Set Unlock Time
99# Master Code or Supervisor Code*
Yellow LED blinks
11# (1-99 sec)# 0#
Yellow LED blinks
*
Yellow LED blinks quickly
*
Yellow LED blinks slowly
*
Yellow LED goes out
The Unlock Time is adjustable for Momentary Operation. A 5 second unlock time is
recommended to extend battery life. Once the unlock time is entered, it is the same for
ALL users except Emergency “02”.
