background image

7

(617417440)

 FM226A 10/18

Access 800

™ 

TCAC2 Series

Locks

Keypad Programming Instructions

Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company.  

All rights reserved. Reproduction in whole or in part without the express written 

permission of Corbin Russwin, Inc. is prohibited.

For installation assistance contact Corbin Russwin 

1-800-543-3658 • [email protected]

4

M800 Programming

Sequence Number

Four digit – Rolling last 1000 transactions, 9999 is highest number
Latest transaction – Highest #, First to print
Oldest transaction – Lowest #, Last to print

User Location 

Three digits - 001 through 100
(User numbers assigned at time of programming)

Transaction Descriptions

Will vary 

Optional Equipment

Printer Paper (6 Rolls 794F189) used for infrared printers.
Infrared Printer 793F109 used to download the user and transaction type.

To Reset / Clear Transaction Log

99# Master Code*  

Yellow LED blinks

76# 00000# 00000#  

Yellow LED blinks

*    

Yellow LED blinks quickly

*    

Yellow LED blinks slowly

*    

Yellow LED goes out

To Clear the Entire Memory and restore Factory default settings

99# Master Code*  

Yellow LED blinks

46# 00000# 00000#  

Yellow LED blinks

*    

Yellow LED blinks quickly

*    

Yellow LED blinks rapidly, slowly when complete

*    

Yellow LED goes out

This deletes ALL Codes, including Master, Emergency and Supervisor. The Master Code is 

set back to 1234*. Door Number to 0001 and Unlock Time to 5 seconds. If the Master Code 

is not known, Factory Assistance will be required to clear the memory. Call 1-800-543-3658

Summary of Contents for Corbin Russwin Access 800 TCAC2 Series

















Reviews: