The Lock ID will NOT open the lock.
The GGM is now established for the SYSTEM MANAGER.
LOCK IS NOW INITIALIZED!
STEP 1 - INITIALIZE LOCK ID:
STEP 2 - CREATE GREAT GRAND MASTER (GGM):
STEP 3 - TEST LOCK:
IQ101G 03.09
EXAMPLE
Factory Code
#
6 digit Lock ID
#
9991234
#
000001
#
EXAMPLE
9991234
UID
#
PIN
#
EXAMPLE
UID
PIN
NOTE: The Lock ID is a
six digit number of your choosing
. Skipping this step will default the Lock ID to 000001.
At the keypad, Enter the Factory Code: 9991234, then the # key, enter 6 Digit Lock ID, then the # key.
Your GGM will consist of a User ID (
UID
) and a Personal Identification Number (
PIN
). You should have these
numbers established before you begin to program the lock. This code is required by the
SYSTEM MANAGER
to
perform all programming functions.
NOTE:
UID
can be 2, 3 or 4 digits in length.
PIN
can be 3, 4, 5 or 6 digits in length.
At the keypad, Enter the Factory Code:
9991234
, then the
key, enter
UID
, then the
#
key, enter
PIN
, then the
#
key.
At the keypad enter
UID
,
PIN
, then the
key.
After entering this code the
LED
will turn green and lock will allow access for 3 seconds.
Marks USA • www.marksusa.com • 631-225-5400 • 800-526-0233 • Fax: 631-225-6136 •
© 2009, Marks USA
Quick Set-Up Programming Guide For & Series Locksets
365 Bayview Ave., Amityville, NY 11701
631-225-5400 • 1-800-526-0233 • Fax 631-225-6136 • www.marksusa.com
